Whirlpool fridge not cooling

Whirlpool fridge not cooling DEFAULT

A Whirlpool fridge that is not cooling is the last thing you need. If you don’t fix this problem, stored food inside your fridge will spoil, which means money wasted. What is the cause of a Whirlpool fridge not cooling? 

The most common cause of a Whirlpool fridge not cooling is dirty condenser coils. If the condenser coils cannot dissipate the heat from the refrigerant gas, your fridge will not cool. Condenser coils clogged with dirt and other debris will not be effective in releasing heat from the gas.

In a Whirlpool refrigerator, hot gas generated by the compressor is carried by the condenser coils to the evaporator coils. As the high-pressure gas travels through these coils, it cools down and goes back to its liquid form. However, if there are clogged condenser coils, there will be poor air circulation. This condition hampers the ability of the fridge to remain cold.

9 possible causes of a Whirlpool refrigerator not cooling:

  1. Temperature Setting of the Fridge
  2. Power Outlet
  3. Check the Door Seals
  4. Fridge Door Has Been Opened Frequently
  5. Recently Added a Large Batch of Food in the Fridge
  6. Temperature Is Hotter than Normal
  7. Heat Source Next to the Fridge
  8. Temperature Setting of the Fridge
  9. Part Is Malfunctioning

9 possible fixes of a Whirlpool refrigerator not cooling:

  1. Clean the Condenser Coils
  2. Set the Fridge to the Right Temperature Setting
  3. Fix the Condenser Fan Motor
  4. Fix the Evaporator Fan Motor
  5. Fix the Start Capacitor
  6. Fix the Temperature Control Thermostat
  7. Fix the Start Relay
  8. Fix the Thermistor
  9. Fix the Compressor

Read on to learn more about why your Whirlpool fridge is not cooling and how you can fix this problem.

Also, to get more fridge space, check out the compact RCA Cubic Foot 2 Door Fridge and Freezer on Amazon:

Click here to see it on Amazon.

Whirlpool Fridge Not Cooling

The most common cause of a Whirlpool fridge not getting cold – or any fridge brand that cannot maintain a cold temperature – is dirty condenser coils. Another cause is a defective thermostat, but dirty coils are the most prevalent.

When your fridge has clogged coils with dirt and all kinds of debris, it cannot function well. It cannot dissipate the heat from the refrigerant gas coming from the compressor. The refrigerant gas passes through these coils, and if these coils are dirty and clogged, they won’t be able to release the heat generated by the gas.

As the compressor releases the hot refrigerant gas, it travels inside the condenser coils all the way up to the evaporator coils and turns back into its original liquid form. If your fridge can’t stay cold, check your condenser coils. Most probably, they are dirty and clogged.

You can easily fix this problem. Cleaning and unclogging the coils should do the job. If these coils are relatively clean and your fridge remains the same, there may be some other problems. I will discuss this topic in the following sections of this article.

whirlpool fridge not cooling

9 Possible Causes of a Whirlpool Fridge Not Cooling

As I have said, dirty or clogged condenser coils are a common problem of a Whirlpool fridge that cannot maintain its cold temperature. But there are other causes as well. So, if you’re unsure about the cause, the first thing you need to do is perform initial troubleshooting.

Troubleshooting involves the following:

1. Temperature Setting of the Fridge

If the freezer is working but cannot maintain its coldness, check the fridge’s temperature setting. Read the fridge’s user manual and see if the recommended optimal temperature setting is the same as the one in your fridge. If not, then set it at the recommended temperature.

2. Power Outlet

Perhaps there’s no power coming from the convenience outlet, that’s why your fridge can’t cool the temperature inside. So, check if the cord is connected snugly to the electrical outlet. Check the electric cord as well. It may be defective and can’t deliver power to the fridge.

Lastly, check the circuit breaker. Perhaps a fuse that connects to the fridge has blown. If so, replace the fuse and switch it back on.

3. Check the Door Seals

Defective door seals are also a common cause of a fridge that can’t remain cold. So, check if some sections of the door seal are loose or are already defective.

If there are some defects in the seal, the cold temperature will be able to escape through them. And if there are already gaps, damages, and other defects, have the seal replaced by a qualified refrigerator technician.

4. Fridge Door Has Been Opened Frequently

Monitor the use of your fridge. Perhaps you have been so busy cooking that you have opened the fridge door more often than usual. If this is true, the temperature inside will naturally go up.

You can avoid this situation if you get all the food you want from the fridge at once. It is also good to organize the food inside the fridge. Place all the food that you commonly need near the door to get them out quickly.

5. Recently Added a Large Batch of Food in the Fridge

More food inside the fridge will make the compressor work more to generate the required temperature to preserve them. If this is true, it will take time for the fridge to cool down. And if it is taxed to its full capacity, it may be unable to produce the required cold temperature.

6. Temperature Is Hotter than Normal

The fridge will also work extra time if the temperature in the environment is hotter than normal. That means the fridge won’t be able to generate the cool temperature that it typically produces during normal weather conditions.

At normal temperatures, your fridge runs from percent of the time. But at hotter temperatures, it will run more than 80 percent of the time.

7. Heat Source Next to the Fridge

You should install your fridge inside the house, preferably in the kitchen. Place it in a location where it is far from a heat source. If your fridge is near a heater or anything that generates heat, your fridge will work hard in maintaining a cool temperature.

In addition, the temperature in its location should only range from 55°F (13°C) to °F (43°C).

8. Temperature Setting of the Fridge

When the fridge comes out of the factory, its temperature is preset at factory settings. This preset temperature is commonly at mid-setting, which is the best for normal household conditions.

Check the user’s manual for your particular issue and modify the setting if you think the fridge is not cooling enough.

9. Part Is Malfunctioning

But if the problem still persists after checking all of the above and making the necessary corrections, it is time for you to call for help.

Get in touch with a professional refrigeration technician if your fridge is already out of warranty. But if it is still within the warranty period, call the manufacturer’s service department for help.

We’ve answered the question, “Why is my whirlpool refrigerator not cooling or freezing?” or “Whirlpool refrigerator not getting cold?” Next, let’s look at common fixes to this issue.

whirlpool fridge not cooling enough

9 Possible Fixes to a Whirlpool Refrigerator Not Cooling or Freezing

There are several fixes to a Whirlpool fridge not cooling enough or at all. Some of the fixes may require a professional, but you can do a few yourself.

1. Clean the Condenser Coils

You can do this fix by yourself if you have the time.

Steps

  1. First, you have to pull the fridge away from the wall. It will give you better access to the condenser coils, which are located at the back of the fridge. You may also need to remove some protective coverings before you can access the coil.
  2. Get a portable vacuum cleaner and vacuum all the coils as well as the outer parts of the fridge.
  3. Scrub the stubborn dirt on the coils with a dry brush.
  4. Give a final vacuum to the coils and outer parts of the fridge.
  5. Check if this procedure fixes the problem.

2. Set the Fridge to the Right Temperature Setting

You can also do this fix by yourself.

Steps

  1. Set the right temperature based on what is recommended in the user’s manual.
  2. Wait at least 24 hours for the change to take effect and recheck if the problem is fixed.
  3. To make the fridge colder, set the temperature control to the next higher setting. And to make it less cold, set the temperature to the next lower setting.
  4. Repeat doing these steps until you achieve your desired temperature.

3. Fix the Condenser Fan Motor

This is an electric motor that draws air over the condenser coils to the compressor. If it is malfunctioning, your fridge won’t cool properly. Also, check the fan blade if there are any obstructions. Then try to turn the fan motor by hand.

If it can’t freely spin, replace the fan motor. It is a job that needs a professional, so call for help.

4. Fix the Evaporator Fan Motor

This motor draws air over the evaporator coils and then circulates it all over the fridge and the freezer. In most refrigerators, the evaporator is located in the freezer compartment. If the evaporator is malfunctioning, it will still be able to make the freezer cold. However, it will not be able to circulate cold air inside the fridge.

Try to turn the evaporator fan motor by hand. And if it won’t move, replace the evaporator motor. Moreover, it is a job that needs a professional, so call for help.

5. Fix the Start Capacitor

This capacitor generates a power boost to the compressor when it is turned on. If it is malfunctioning, the compressor will not be able to start. The heart of the fridge is the compressor. And if it is not working, the fridge will not cool.

You can check if it is working or not by using a multimeter. Moreover, you can replace it if you have tools, such as a multimeter, soldering iron, pliers, and other stuff. But if you don’t have the tools, it would be better to call for professional help.

6. Fix the Temperature Control Thermostat

This thermostat directs voltage to the compressor and evaporator fan motor. In some fridge models, it can also direct voltage to the condenser fan motor. If it malfunctions, the refrigerator won’t be able to run.

Rotate this thermostat from its lowest setting to its highest setting and listen if it will click. If it clicks, it may not be defective. However, if it does not click, get a multimeter and check its continuity. If there is no continuity, have it replaced by a professional technician.

whirlpool refrigerator not cooling but freezer is working

7. Fix the Start Relay

The start relay works with the start winding so the compressor can start. If it is malfunctioning, the compressor will not run sometimes or may not even run at all. And this will result in your fridge not being cold enough.

Use a multimeter to test the continuity of the start relay between the start and run terminal sockets. If there is none, ask a professional technician to replace it.

8. Fix the Thermistor

A thermistor monitors the temperature inside the fridge. It sends its temperature readings to the control board, where the condenser and evaporator’s power is controlled.

If the thermistor is malfunctioning, the compressor and evaporator will not run when they need to run. Therefore, it will result in a fridge that cannot maintain its cold temperature. Check the thermistor with a multimeter for continuity.

The resistance should also change together with the temperature of the fridge. But if it does not change or there is no continuity, have it replaced by a professional technician.

9. Fix the Compressor

The compressor is an electrical device that can compress the refrigerant and then circulate it through the evaporator and condenser coils. A defective compressor will result in a fridge that won’t cool.

Compressor problems are not usual. But you can also check it if you have done all the above fixes and the problem still persists. Call a professional refrigeration technician for a compressor replacement.

Conclusion – Whirlpool Refrigerator Not Cooling

Why is your Whirlpool fridge not cooling enough or at all? The most common cause of a Whirlpool fridge not getting cold is dirty condenser coils. The function of the condenser coils is to dissipate heat from the refrigerant gas. If your fridge cannot keep its coolness, these coils are probably malfunctioning.

Condenser coils that are clogged with dirt and other debris will not be able to release heat from the gas effectively. You can fix the problem by cleaning these coils.

9 possible causes of a Whirlpool fridge not getting cold:

  1. Temperature Setting of the Fridge
  2. Power Outlet
  3. Check the Door Seals
  4. Fridge Door Has Been Opened Frequently
  5. Recently Added a Large Batch of Food in the Fridge
  6. Temperature Is Hotter than Normal
  7. Heat Source Next to the Fridge
  8. Temperature Setting of the Fridge
  9. Part Is Malfunctioning

9 possible fixes of a Whirlpool fridge not getting cold:

  1. Clean the Condenser Coils
  2. Set the Fridge to the Right Temperature Setting
  3. Fix the Condenser Fan Motor
  4. Fix the Evaporator Fan Motor
  5. Fix the Start Capacitor
  6. Fix the Temperature Control Thermostat
  7. Fix the Start Relay
  8. Fix the Thermistor
  9. Fix the Compressor

If you try the possible fixes we discussed, your Whirlpool fridge should start cooling again.

You Might Also Like

Sours: https://homecarezen.com/whirlpool-fridge-not-cooling/

DISCLOSURE: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission at no additional cost to you

A Whirlpool fridge must have all of its components in good working order to cool any items inside. So, if your Whirlpool fridge can’t stay cool, we’re here to help.

A Whirlpool fridge will not be able to cool properly if it has dirty condenser coils. Besides that, failed fan motors on the condenser or the evaporator coils could also prevent the fridge from removing hot air and distributing cold air. Lastly, the temperature control thermostat and compressor start relay could prevent the fridge’s cooling system from turning on at all.

In the following sections, we’ll show you which parts on your Whirlpool fridge to troubleshoot to get your fridge cold again.

Caution!

Before performing any repairs on your Whirlpool fridge, be sure to disconnect the power supply to the appliance. You must do this to avoid the risk of electrocution and reduce the risk of injury, especially when working closely with the fridge’s components.

Dirty Condenser Coils

The condenser coils of your Whirlpool fridge are located at the back of the appliance, typically closer to the floor. These coils are part of the fridge’s closed-loop cooling system, which circulates refrigerant.

Once the refrigerant has absorbed all of the heat on the fridge’s inside, it will flow through the condenser coils on the back to release that heat away from the fridge.

The condenser fan helps with this process by ensuring continual airflow past the coils, allowing them to release heat even quicker.

How it fails:

With air continually blowing past the condenser coils, they tend to accumulate plenty of dirt and dust quite quickly. As this buildup gets worse, the coils become a lot less efficient at releasing the heat from the refrigerant that passes through.

That starts a chain reaction that prevents the Whirlpool fridge from cooling. With dirty condenser coils, the refrigerant continues flowing through the closed-loop cooling system at a high temperature, which keeps the fridge warm instead of cooling it down.

How to fix:

Fixing dirty condenser coils is very straightforward. First, move the fridge away from the wall so you can have easy access to its condenser coils at the rear. Next, you will need to remove any panels that might be covering those coils.

Related: How to Clean Condenser Coils On a Whirlpool Refrigerator

As mentioned earlier, the fridge must be turned off before you do this. That’s because the condenser fan is located in the same area and could injure your fingers.

Using a vacuum and a brush, clear all of the dust from the condenser coils. For maximum efficiency, you should clean these coils regularly to prevent future buildups of dust. Doing this once a year would be a good frequency to start with.

Condenser Fan Motor

As mentioned above, the condenser coils help to cool down the refrigerant that circulates in the fridge&#;s cooling system. However, the condenser coils can’t do this effectively on their own and need plenty of help from the condenser fan.

This fan continuously blows air past the condenser coils, allowing heat to dissipate into the air behind the fridge. The condenser fan motor must be in good working order and operating at total efficiency for the fan to do this.

How it fails:

If the condenser fan isn’t working, the motor may have shorted out or broken down from excessive wear and tear.

Related: Top Reasons Why Viking Refrigerator Is Not Cooling

To troubleshoot the motor, first, ensure that nothing is stopping the fan blades from turning. That could happen due to a dust or dirt buildup or foreign objects getting stuck between the blades.

When you’re sure that the fan is free from any obstructions, try to turn the fan blades manually. If you can turn the fan blades, that means there’s nothing stuck in the blades. So, the motor may have shorted out. 

How to fix:

To resolve this issue, you’ll need to replace the condenser fan motor. First, remove the access panel covering the condenser section of the fridge, and place it to the side.

Once you&#;ve reached the condenser fan, remove the fan blades first. Then, unthread the screws holding the condenser fan motor in place and disconnect its power connector.

Mount the new condenser fan motor in the same way as before, and reconnect the power connector. Then, attach the fan blades, and put the access panel back on the fridge.

Evaporator Fan Motor

Besides the condenser fan in your Whirlpool fridge, there is another fan located at the evaporator as well. When the refrigerant flows through the evaporator section of the cooling system, it’s at a very low temperature. As a result, the evaporator cools down the fridge’s inside by absorbing heat while supplying cold air.

The evaporator will cool down the fridge efficiently as long as the fan is helping to distribute the cool air coming off of it.

How it fails:

If your Whirlpool fridge isn’t reaching the temperature that you’ve set, it could be because the evaporator fan motor has failed. For instance, the motor might have shorted out or burned out. If the fridge has been in use for a long time, it’s also likely that the motor has been through lots of wear and tear and stopped working correctly.

Related: 5 Reasons Why Mini-Fridge Is Not Cooling

If you have a multimeter, you could test the evaporator fan motor for continuity to be sure. Plus, you could also look out for other symptoms, such as if the motor runs very noisily.

How to fix:

To resolve this issue, you’ll need to take out the existing evaporator fan motor and replace it with a new one. Unlike the condenser, the evaporator fan motor is located inside the fridge. So, you’ll be accessing it from inside the fridge compartment.

First, remove all the contents of the fridge, including its shelves. Then, remove the back panel to expose the evaporator coil. Here, you should be able to locate and identify the evaporator fan motor quickly.

Unthread the screws holding the motor housing in place and disconnect the electrical connector. Once you’ve removed the housing, you can then take off the fan blade before removing the old motor. 

Place the new motor on the housing. Then, work your way backwards: reattach the fan blades to the motor shaft, mount the housing in the fridge, and plug the electrical connectors back in. Lastly, replace the panels that you removed earlier.

Temperature Control Thermostat

The temperature control thermostat is designed to sense how cold your Whirlpool fridge might be at any moment. This thermostat is responsible for supplying power to the cooling system (e.g. compressor and fan motors) and will turn them on when necessary.

Suppose your Whirlpool fridge is too warm. If that’s the case, the thermostat will supply power to the cooling system to remove heat and generate cold air.

As soon as the thermostat senses that the fridge has reached your set temperature, it will shut off the cooling system to avoid over-cooling the fridge and wasting energy.

How it fails:

When the temperature control thermostat fails, it could mistakenly sense that the fridge is already cold even when it’s not. As a result, it will never send power to the cooling system, leaving your fridge warm.

Related: 5 Reasons Why LG Refrigerator Is Not Cooling

How to fix:

To resolve this, you’ll need to replace the temperature control thermostat. You’ll find it on the inside of the fridge, above the top shelf. Disconnect the wire harness and remove the thermostat housing to work on it outside the fridge.

The control thermostat will have electrical connectors and a capillary tube attached to it. First, remove the connectors, then replace the faulty control thermostat with the new one in the housing.

Lastly, reinstall the housing inside the fridge by reconnecting the wire harness and threading the mounting screws.

Start Relay

The start relay is a component that starts and powers the compressor. For example, when the fridge isn’t cold enough, the start relay will power the compressor, circulating the fridge’s refrigerant throughout the cooling system to make the fridge cold.

How it fails:

When a start relay gets faulty, it will not keep the compressor running for as long as it should. Worse yet, a failed start relay might not even start the compressor at all. Without any refrigerant circulating throughout the closed-loop cooling system, your Whirlpool fridge will fail to cool down and reach your set temperature.

A common symptom of a failed start relay is a clicking sound coming from the back of your fridge, even though the compressor does not start. Besides that, a burning smell is another sign that the relay has shorted out.

How to fix:

A faulty start relay needs to be replaced. You can do this by accessing it through the back of the fridge.

Depending on the model and its design, you might need to remove a rear panel to access the relay. You’ll find that the start relay is attached to a run capacitor, both of which are attached to the compressor motor.

Disconnect the run capacitor and attach it to the new start relay. Then, attach them back onto the compressor motor.

Sours: https://howtofixit.net/5-reasons-why-whirlpool-fridge-is-not-cooling/
  1. Youtube free old mystery movies
  2. Home depot rectangle patio table
  3. 2022 lexus gx 460 price

Scheduling options

If there was an award for hardest-working appliance your refrigerator should be a front-runner for keeping food fresh and cool. But what do you do if your Whirlpool refrigerator isn’t getting cold anymore? We’ll review common reasons why from an incorrect temperature to the need for refrigerator coil cleaning.

Simple Solutions When a Whirlpool Refrigerator Isn’t Getting Cold

While there are instances when your refrigerator needs a repair, there are often simple solutions when your Whirlpool refrigerator isn’t getting cold. These easy fixes can help both you and your refrigerator maintain your cool.

#1. Refrigerator Temperature Not Set Correctly

When your refrigerator isn’t cooling appropriately, first check the temperature settings. It’s generally recommended that you keep your Whirlpool refrigerator temperature at 37°F and the freezer at 0°F to best preserve food. Your owner’s manual may have specific recommendations for your model refrigerator.

If your refrigerator is set at the correct temperature but still feels warmer, place a refrigerator thermometer inside the fridge. If it registers higher than what the refrigerator reports, lower the temperature until the thermometer registers 37°F.

#2. Condenser Coils Need Cleaning

A refrigerator’s condenser coils help cool refrigerant by condensing it into a high pressure gas. If the coils are covered in dirt and dust, they may not adequately cool the refrigerant and your refrigerator’s interior may feel warmer.

Cleaning the refrigerator coils every months will ensure that dust and dirt don’t hamper their function. Here’s how to clean Whirlpool refrigerator coils quickly and easily:

  1. Disconnect the refrigerator’s power.
  2. Remove the base grille by pushing it in at the top and pulling up on the bottom.
  3. Vacuum the grille, condenser coils and the area around the coils with a soft brush vacuum attachment.
  4. Replace the grille by lining up the support tabs and metal clips and pushing it firmly in place.
  5. Reconnect the refrigerator’s power.
whirlpool refrigerator isn't getting cold

#3. Storing Too Many Items

Did you know your Whirlpool refrigerator doesn’t get cold if it’s overfilled? Storing too many items in a refrigerator can lessen the airflow and circulation between items that’s needed to keep them cool. In addition, if the refrigerator’s air vents are blocked with too much food, cool air won’t flow to the interior.

For optimal airflow keep your refrigerator no more than ¾ of the way full. When storing items in the refrigerator, place them away from the air vents to ensure that cool air flows freely into the fridge.

whirlpool refrigerator not cooling

#4. Faulty Refrigerator Door Gaskets

The rubber gasket on your refrigerator door provides a tight seal when the door is closed, keeping cold air inside. A Whirlpool refrigerator not cooling may have a dirty or damaged gasket that leaks cold air, warming the refrigerator’s interior.

Inspect the door gasket for damage, using a cloth dipped in warm water to clean away any dirt and debris. If the gasket is ripped or broken it will need to be professionally replaced.

#5. Broken Refrigerator Component

If your Whirlpool refrigerator isn’t getting cold even after these interventions, it’s possible a broken component is the reason. These parts are often responsible for cooling issues:

Broken fan motor: the fan motor draws cool air over the condenser coils and compressor to cool refrigerant. If the fan’s blades aren’t obstructed, spin freely, and the fan motor shows no continuity with multimeter testing, it requires replacement

Faulty thermistor: a thermistor monitors the refrigerator’s temperature, signaling for cooler air when the temperature rises. Incorrect temperature readings won’t signal cooler air when needed, warming the refrigerator. A faulty thermistor requires replacement.

Defective start relay: this component starts the compressor to create cool air as needed. When the start relay malfunctions, it won’t properly signal the compressor. If it has no continuity the start relay is defective and needs replacement.

St. Augustine’s best refrigerator repair service is here to help when your Whirlpool refrigerator isn’t getting cold. Call us to schedule an appointment!

Sours: https://www.cdappliancerepairservice.com/blog/5-reasons-why-your-whirlpool-refrigerator-isnt-getting-cold/
Easy Refrigerator Fix, Reset (Defrost Timer) Switch, if it stops running, cooling or working.

Whirlpool is a reputed brand when it comes down to household appliances and their fridges are one of the best ones. There are advanced features available in these fridges which promise streamlined functionality. However, the Whirlpool fridge not cooling has become a frustrating issue, and what’s a fridge without cooling? Well, we have the solutions available for you!

Whirlpool Fridge Not Cooling

1) Check The Condenser Coils

The condenser coils in the Whirlpool fridge are generally available on the bottom side. Over the course of time, dust and debris will accumulate on these coils which results in ineffective heating circulation. Also, when the heat isn’t released properly, it will increase the temperature of the fridge which results in ineffective cooling.

So, when the fridge isn’t cooling, the simplest solution is to clean up the dust and debris built up on the coils. For cleaning up, switch off the Whirlpool fridge and locate the condenser coils. If the coils are at the bottom side, you might have to lay down the fridge but unload the fridge for that. However, when you’ve access to the coils, use your vacuum cleaner to suck up all the dust and debris.

On the contrary, if you cannot use a vacuum cleaner, use a warm cloth dipped in a soapy solution to clean the coils. If some dirt is stubborn, get a dry brush and scrub them off. Once everything is clean, switch on the fridge and the cooling will be restored.

2) The Temperature Settings

Believe it or not, correct temperature settings are extremely important when you want to ensure optimal cooling in the fridge. You can consult the fridge’s manual to determine the best possible temperature settings. When you change the temperature settings, make sure that you wait for one day before making a decision. This is because a day is essential for the new temperature settings to become effective.

Generally, the best solution is to choose the lowest temperature settings because it can speed up the cooling. If new temperature settings work, good for you. However, if it doesn’t, you can always try the next solution that we’ve mentioned below.

3) Motor

In particular, we are talking about the fan motor. For those who don’t know, this is the electric motor that’s responsible for drawing air all over the coils and the compressor. When the motor is not working properly, the cooling will be impaired. While you are checking the motor, make sure that you check the fan blade because any obstructions with the blades will cause cooling issues as well.

The simplest solution is to rotate the blade by hand; if it doesn’t move easily and needs too much pressure, the moto should be replaced by a professional technician.

4) Evaporator Motor

We have previously talked about the fan motor but if that doesn’t seem to fix the cooling, you can check the evaporator motor. This motor is responsible for drawing air all over the evaporator coils and circulate the air all around the freezer and fridge compartment. In the majority of fridges, this motor will be available in the freezer area. In case this motor has malfunctioned, it won’t be able to circulate chill air within the fridge.

For this purpose, you have to inspect the motor manually. First of all, switch off the Whirlpool fridge and try to move the motor with your hand. If it moves, you can follow the next troubleshooting method. However, if it doesn’t budge, it’s calling for a motor replacement to ensure better cooling and better performance.

5) Start Capacitor

If you don’t know, the Whirlpool fridge is designed with a start capacitor and is responsible for providing a boost of electricity and power to the compressor whenever it’s enabled. On the other hand, when the capacitor isn’t working, the compressor won’t initiate functioning and will result in cooling issues as well. In simpler words, if the compressor doesn’t work, you won’t have cooling.

For checking the functionality of a capacitor, use a multimeter. If there is no continuity, take out your tool kit and replace the capacitor. On the contrary, if you don’t have professional experience, hire a professional technician to get the capacitor replaced.

6) Thermostat

Whirlpool fridges are integrated with the temperature control thermostat and are responsible for directing the voltages to the fan motor and compressor. In addition, it might be responsible for directing the voltages to the condenser motor. Anyways, when the thermostat is malfunctioning, the fridge will have a hard time cooling up. The solution is to rotate the thermostat to the highest settings and look for the clicking sound. If there is no clicking, the thermostat isn’t working at its best and it should be replaced. If you want to be sure, you can also check the continuity through a multimeter.

7) Start Relay

This component is responsible for starting up the compressor and it works with the start winding as well. When the start relay is damaged, the compressor won’t work, hence the cooling issue. You should use a high-quality multimeter to determine the continuity of the relay. If there is no continuity in the start relay, get it repaired or replaced by a technician.

8) Thermistor

For those who don’t know, a thermistor is responsible for monitoring the overall temperature of the Whirlpool fridge. It can send the temperature data to the control board because it also controls the evaporator and condenser power. When the thermistor isn’t malfunctioned, the Whirlpool fridge won’t be able to maintain the cold temperature.

To be sure, check the continuity. Keep in mind that while you are checking the continuity, keep in mind that the resistance should also budge. The temperature and resistance are directly proportional. Anyways, if you cannot see continuity, get the thermistor replaced by a skilled and experienced technician.

If your Whirlpool fridge is unable to create cooling even after following all the troubleshooting methods, you must call customer support at The customer support can help Whirlpool technicians your way to ensure the problem is fixed to the core. In addition, you can get free repair and part replacement if the fridge is on warranty.

Categories TroubleshootSours: https://missvickie.com/whirlpool-fridge-not-cooling/

Not cooling fridge whirlpool

Why is My Whirlpool Refrigerator Not Cooling? 5 Possible Causes &#; How to Fix Them.

Are you finding your refrigerator running warm? It&#;s unsettling to discover your Whirlpool refrigerator not cool. After all, the last thing you need is food spoilage and money down the drain. The good news is, when your Whirlpool fridge is not cooling enough, a few DIY steps will often get things moving in the right direction again.

Troubleshooting Guide:
Whirlpool Refrigerator Not Cooling

Our clients will sometimes ask, &#;Why is my Whirlpool fridge not cooling?&#; We advise initial Whirlpool refrigerator troubleshooting before we send in the big guns &#; our experts in refrigerator repair.

Possible Cause #1: Dirty Condenser Coils

Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can&#;t release the heat properly. You may have even noticed your refrigerator is noisy, which can be due to your fridge working harder to maintain a proper temperature.

Clean the Condenser Coils

  • Pull fridge away fromthe wall &#; allows better access to the back and underneath of unit. The coils are snake-like in shape and often located under the refrigerator. You may also have a toe guard at the bottom front of the fridge that can be removed for better cleaning.
  • Vacuum &#; use a narrow hose attachment to vacuum all the coils and external hardware on the refrigerator.
  • Use a Dryer Brush &#; scrub the coils with a dry brush to remove stubborn debris. These brushes can be purchased on Amazon or your local grocery/hardware store.
  • Vacuum &#; give one more vacuum to remove all remaining dirt.
dirty condenser coils

Photo from Green Living

 

Possible Cause #2: Door Seal is Loose

The second most common cause for a Whirlpool refrigerator not cool is a defective door seal. If the door seal is loose or damaged, your fridge won&#;t cool properly. The door seal ensures the cold air inside the refrigerator is locked inside rather than leaking into your kitchen. Check the door seal for damage, gaps, or other defects. If you don&#;t have a tight door seal, replace it.

whirlpool fridge not cooling enough

Image from The Family Handyman

 

Possible Cause #3: Temperature isn&#;t Set Properly

Is your Whirlpool refrigerator not cooling but freezer is working? Check your temperature setting. Refer to your owner&#;s manual for the optimal temperature setting for your particular model.

Possible Cause #4: Power Failure

In the event of power failure:

  • Check the cord &#; ensure it is snugly connected to the power outlet.
  • Inspect the cord &#; look for signs of damage. Replace cord if damaged or showing signs of wear and tear.
  • Check circuit breaker &#; check to make sure you didn&#;t blow a fuse, and if so, flip it back on.
whirlpool refrigerator troubleshooting

Image from Gina Valley

 

Possible Cause #5: Part Failure

If you have checked the above causes and still have a Whirlpool refrigerator not cool, then you may have a broken condenser fan motor, failed thermostat, or other part failures, which means it&#;s time to call an appliance technician for repair.

 

Sours: https://aappliance.ca/blog/whirlpool-refrigerator-not-cooling/
Refrigerator Not Cooling - How to Fix - What to Check [2020]

4 Reasons Why Your Whirlpool Refrigerator Freezer is Cold but Refrigerator is Warm

When your refrigerator malfunctions the problem typically affects the whole unit. So when your Whirlpool refrigerator freezer is cold but refrigerator is warm, it can seem like a mystery. We’ll take the detective work out of troubleshooting the problem with common causes like an overstuffed refrigerator or failed defrost system.

Where to Start When Your Whirlpool Refrigerator Freezer is Cold but Refrigerator is Warm

If a Whirlpool refrigerator freezer is cold but refrigerator is warm there are often common part malfunctions that cause the problem. However, there are also some simple fixes you can do at home. We’ll discuss each possibility to help determine if a repair is necessary.

#1. Refrigerator is Overstuffed

If you’re wondering why my fridge isn’t cold but the freezer is your refrigerator may be overloaded. When a refrigerator is stuffed with too much food cold air can’t properly circulate between the compartments and individual items. Without proper air circulation, the refrigerator can’t maintain a cool interior.

Here’s how to improve air circulation in your refrigerator and prevent overstuffing:

  • Dispose of old food containers and spoiled food
  • Clean the refrigerator’s interior with a clean cloth and warm soapy water
  • Rearrange shelves to allow for better airflow
  • Keep refrigerator ¾ of the way full for best air circulation
whirlpool refrigerator freezer is cold but refrigerator is warm

Image Credit: Become Your Best

#2. Whirlpool Condenser Coils are Dirty

Condenser coils cool refrigerant to maintain a cool temperature within the refrigerator. If the coils become covered with dust and debris, they may not be able to do so effectively. Consequently, your refrigerator won’t get cold but freezer will still maintain its temperature.

Cleaning the condenser coils can restore cool air to the refrigerator and should be done every months. Refrigerator coil cleaning can be accomplished with these simple steps:

  1. Disconnect refrigerator from power source and locate condenser coils
  2. With a narrow hose vacuum attachment, vacuum dust, and debris from the coils and surrounding area
  3. Remove stubborn particles with an appliance brush
  4. Vacuum up any remaining debris
  5. Reconnect refrigerator to power source

#3. Evaporator Fan Motor is Defective

When you find your Whirlpool refrigerator not cooling but freezer works fine a defective evaporator fan motor is a common part malfunction. This motor powers the fan that blows cold air over the refrigerator coils. Without this fan refrigerant won’t cool enough to maintain the refrigerator’s temperature.

If the evaporator fan blades don’t turn easily or the fan motor is especially noisy, it’s likely defective. While multimeter testing can confirm this with a lack of continuity, a faulty fan motor requires professional replacement.

#4. Defrost System has Failed

If any part of the refrigerator’s defrost system fails, ice can start to accumulate on the evaporator coils, making the refrigerator work harder to keep cool. These defrost components are often responsible when a Whirlpool refrigerator freezer is cold but refrigerator is warm:

  • Defrost control board: dictates how often to run the defrost function. If it malfunctions the defrost function won’t operate.
  • Defrost Thermostat: monitors the evaporator coils’ temperature. If it fails it may provide incorrect temperature readings and the defrost cycle won’t turn on when needed.
  • Defrost timer: works with the control board to turn the defrost function off and on throughout the day. If it’s malfunctioning, the refrigerator won’t defrost as necessary.

Let the Whirlpool refrigerator experts help when your Whirlpool refrigerator freezer is cold but refrigerator is warm. Call us to schedule an appointment!

Sours: https://www.sloanappliance.com/whirlpool-refrigerator-freezer-is-cold-but-refrigerator-is-warm/

You will also be interested:

I was just passing by the men's room. Let me, you think, I'll drop by, and what if there is an employee Natasha. What if she stands there without panties and waits.



1133 1134 1135 1136 1137