Three tier stand for bathroom

Three tier stand for bathroom DEFAULT

Project details

This bath stand is compact enough to fit in virtually any bathroom and can be especially handy beside the tub for easy access to shower items.

Be sure to use materials that can withstand the moisture in a bathroom; solid wood, rust-proof fasteners, and a water-resistant finish ensure this unit will last. The stand is not limited to bathroom use only; supplement any space with this extra storage solution. Add paint or stain for your desired finish.

Steps for building a three-tiered bath stand:

Step 1: Make the shelf frames

Gregory Nemec

Glue and screw a cleat to each of six apron pieces, flush along one edge, with the apron centered between the ends of the cleat.

Glue and clamp the other six aprons to the ends of the cleats to form the frames for all three shelves, and create a notch at each corner to fit against a leg.

When the glue dries, glue slats to the cleats on two of the frames, using tile spacers to maintain consistent gaps.

Step 2: Attach the legs

Mark the locations for the bottom and middle shelves on the legs.

Place two legs on the table, apply glue to the notches on one shelf, stand it up between the legs at its marks, and clamp everything tight.

Gregory Nemec

Working from the underside of the shelf, drill a pilot hole through the cleat and into each leg, then drive a trim-head screw into each pilot hole.

Glue and screw the next shelf to the legs at its pair of marks.

When the glue dries, attach the shelves to the other two legs in the same way.

Step 3: Assemble the Top Shelf

Flip the top shelf frame upside down and attach it flush with the tops of the legs.

Gregory Nemec

Next, glue together the pieces to make the face frame, which covers the tops of the legs and surrounds the slats.

When the frame is dry, line up its corners with the corners of the legs. Use a combination countersink bit to drill pilot holes and bore recesses for plugs through the frame and into the legs.

Glue the frame to the legs and aprons, and drive in deck screws. Now glue the slats to the cleats. Space the slats evenly, but leave no space between them and the frame.

Glue wood plugs over the face-frame screws and sand them flush. Finish the piece with oil or wax.




3-Tier Bath Tower XL


Personalization Available!

3-Tier Bath Tower            XL-350415
3-Tier Bath Tower            XL-350415
Hover over image to zoom or click to enlarge
3-Tier Bath Tower            XL-3504153-Tier Bath Tower            XL-350415
3-Tier Bath Tower            XL-350415
Hover over image to zoom or click to enlarge

Personalization Available!

{{vm.productView.DefaultPrices[0]._amount | currency}} - {{vm.productView.DefaultPrices[1]._amount | currency}} {{vm.productView.DefaultPrices[0]._amount | currency}} {{vm.productView.SalePrices[0]._amount | currency}} - {{vm.productView.SalePrices[1]._amount | currency}} {{vm.productView.SalePrices[0]._amount | currency}}

SAVINGS: {{vm.savings.currency}} ({{vm.savings.percentage}})


SAVINGS: {{vm.savings.currency}} ({{vm.savings.percentage}}) 

Mark selections below to see product availabilityThis item is not available at this time.


See {{vm.backordermessages.length - 1}} More Notes

Learn More

Select subscription frequencySelect Quantity


Restrictions & Surcharges
  1. Words that start with cav
  2. Nvidia gtx 970 for laptop
  3. Lectures of qasim ali shah

This DIY farmhouse three tier stand was so easy to make! I love the extra bathroom countertop storage the tray adds. Not to mention, it’s a super cute place to decorate now!

Please tell me I’m not the only one with THOUSANDS of ideas sitting on my Pinterest boards just waiting to be made. 

Ever since we moved to our new fixer upper, I’ve been a bit at a loss of what to do with all of this countertop space in our main bathroom! This was definitely NOT a problem we had on our last bathroom with literally the smallest bathroom vanity ever. 

I was thinking it would be cute to put something in the corner of the countertop to add a little farmhouse charm to the room. This house is definitely lacking in the farmhouse department and our bathroom is no exception.

The finishes are more modern and I’m not sure what (if anything) we’re going to change in here.

We’ve got TONS of other renovation plans for the rest of the house to keep us busy for a long while (check out our full renovation plans for this fixer upper here).


Related – If you love the farmhouse style, you definitely want to check out these posts:


Even though I wanted to add some farmhouse charm to our bathroom, I wanted it to be functional too. When I saw this adorable three tier stand that the amazing Liz Marie featured on her blog, I knew it would be perfect for a little extra bathroom countertop storage. 

Here’s is my Pinterest Challenge inspiration: 

This post contains affiliate links, but nothing that I wouldn’t wholeheartedly recommend anyway! Read my full disclosure here.

Supplies for three tier stand:

Step 1. Make spindles.

Logan has been honing a new hobby, wood turning. I saw this three tier tray and knew it would be a fun project for Logan to work with me on.

If you don’t have a wood turnin’ hubby like me, have no fear! You can totally buy spindles like these at Home Depot.

First, Logan made two spindles about 6 inches tall out of some old juniper branches in our backyard. I love how unique the handmade spindles are. There are no two shapes the same!

Step 2. Cut wood rounds.

Next, he cut out 3 wood rounds from a sheet of 3/4” sanded plywood using a circle saw guide. He cut out the wood rounds at 8, 10 and 12 inch diameters.

Of course, he was so excited once he finished the spindles and cutting out the wood rounds, he put it together right away so I don’t have any before pics (thought I had taught him better than that!).

It also would have been way easier to paint everything BEFORE it is put together. So if I were to do this again, I’d definitely tell him to hold up so I could paint everything.

Step 3. Assemble three tier stand.

His assembly process for the three tier stand was pretty simple…

  • He attached the middle spindle to the middle of the wood rounds by using a 3/8” wooden dowel and a bit of wood glue.
  • He drilled a hole through the middle of the 10” plywood circle (middle tray) and the top and bottom of the spindles.
  • The bottom tray was attached to the spindle not by a dowel, but with a screw for some extra support.
  • The top tray was attached to the spindle with just wood glue (we didn’t want there to be a hole or screw on top).

Let the wood glue dry overnight before handling the tray.

Step 4. Paint & distress stand.

After the three tier stand was all put together, I got to painting! I used this white chalk paint and a foam brush.

I was super anxious to get to painting that I sort of forgot to sand down the edges of the plywood before painting, which would have been a little easier (and not torn up 2 foam brushes in the process).

But, that’s why I always use those foam brushes. They are so inexpensive, it’s not big deal when they get a little torn up and you have to toss ’em.

I started by painting the bottom of the tray and then painted everything else. I did two coats of chalk paint.

The three tier stand really started to get that classic farmhouse look when I started distressing. I used 220 grit sandpaper.

To seal the three tier stand I used this spray sealer.

We didn’t end up adding the feet like Liz Marie had in our inspiration tray, but I’m thinking that I’ll probably go back and add them later. I think they will add a lot! What do you think??

I love how it looks styled on our bathroom countertop. It adds a lot of extra space for storage and places to decorate, of course!

I added some lotion and bubble bath to the top tray (along with a simple white pitcher and my $2 DIY cotton stems).

The bottom trays on the three tier stand are styled with rolled up washcloths, my DIY lip scrub, this amazing bath salt and some Q-tips.

You wanna know the BEST part about this farmhouse style three tier stand?? We made it entirely with supplies we already had on hand….free craft projects are the best projects, right?!

Even if you don’t have the space for a tree tier stand on your bathroom countertop, it would look so cute on a kitchen counter, coffee bar, dining table…you name it!

Hopefully this little project inspires you take go check out your Pinterest boards and make it happen! Quit pinning and start doing, girl!


  1. Create two spindles.
  2. Cut 3 wood rounds.
  3. Attach the spindles to the wood rounds.
  4. Paint with chalk paint.
  5. Distressed.
  6. Seal.
3 Tier Rolling Holder Storage Shelves Multifunction Rack Bathroom Kitchen Trolley Cart

Thirteen drunk men, one girl. At first, the drunken ones who had not spent their time began to arrive, and therefore the angry members of the team. Muttering curses, they unsteadily climbed the ramp into the shuttle, fell into chairs, buckled up, immediately either disconnecting or entering into polemics because of such a quick departure.

The arrival of the first mate lowered the intensity of the controversy, lowered the drunken enthusiasm, but the question was formulated clearly. The emperor gave the platform for looting for ten hours.

Stand bathroom for tier three

I stood over her, resting my hands on the floor, and she, collecting sperm not only in her mouth, but also in. Her palm, began to rub it over her and my face. It seemed to me that this alone would give me an orgasm, but then someone pressed his lips to my invitingly raised ass.

3 Tier Bathroom Rack Assembly - Storage and Organization

And then it didn't show a little. Super club all the same. We hid to the womans party, looked neatly - well, nothing to yourself. Both our mathematicians are worthy of the "leggings", almost all naked - they are wearing only bras, and two of which are clearly a gangster exterior of the. Young souls of their men in Yes, here it is clearly not by agreement that they are doing - one holds his legs in his hand and threatens the hoarse voice of the girls with all the carrots and at the same time "give them faces.

Similar news:

Her large breasts lifted into the air and, hanging for a moment, fell on her body. My cock slid in her warm and wet pussy. Soon Ira jumped on me even faster than before.

2427 2428 2429 2430 2431