Predator 420 torque converter

Predator 420 torque converter DEFAULT

Torque converter on Predator cc

GoKartNarc said:

ID 3/4" × OD /8"
They didn't specifically say they were the bearings for the jack shaft though. I did a little research and is it possible that I need the high speed bearings? You can see how the new belt is rubbing a bit. The torque converter plate is from Go Power Sports. I have two different torque converter drivers, not sure which one is on there now. That could be another problem.

Click to expand

It may not be the only cause, but Im sure it is not assisting you. The 40 series is intended to run with the driven clutch inboard,
unlike the setup with the backplate you have.

With the driven clutch outboard, It must slide freely on the shaft about 1/2in? or so, to maintain alignment.
This I do not think is possible with the backplate style kit.

A solution is to rotate the engine driver around, but I have not tried this fix, nor is it well proven.

Or make a proper jackshaft so the clutch can run in the correct orientation.

Not correcting the alignment , even if the next bearing lasts longer, belt life and efficiency will suffer.

 

Sours: https://www.diygokarts.com/community/threads/torque-converter-on-predatorcc/

BLAST LED - Predator CC Go Kart Torque Converter Kit: 40 Series Mounting Back Plate, 1" Driver, Driven Pulley, Belt, Mounting Hardware (3/4" Driven Pulley)

Size:3/4" Driven pulley

Heavy Duty 40 Series Go Kart Torque Converter Kit w/ MOUNTING BACKPLATE This kit includes set of brand new high quality 40 Series 1" driver pulley, and driven clutch (5/8" OR 3/4" OR 7/8"-- choose your size per your installation), mounting backplate with jackshaft and belt. Plate is cut from 1/4" thick solid steel. Great for use on high performance engines with a 1" crankshaft diameter-- Ideal for Predator CC, Honda GX///, Briggs and Straton, Vanguard V-Twins. Replacement for COMET 40 Series and many other engines: COMET-- , A, , A, , A MANCO- FITS all 8HPHP engines with a 1" crankshaft with 1/4" keyway. Works well for high performance Go Karts, ATVs and small off-road vehicles involving rough terrain, slopes, small hills, gravel. . PACKAGE INCLUDES: 1" Shaft size Driver Clutch with 1/4" keyway Driven Clutch (5/8" or 3/4" or 7/8")-- Select size required during checkout 1 Belt: Symmetrical

Sours: https://www.amazon.com/BLAST-LED-Predator-Converter-Mounting/dp/BLRLF25
  1. 2001 dodge cummins performance parts
  2. The christmas conversation snl 2020
  3. Camden clark medical center

Disclaimer: We are using Amazon affiliate Product Advertising API to fetch products from Amazon, include: price, content, image, logo, brand, feature of products which are trademarks of Amazon.com. So, when you buy through links on our site, we may earn an affiliate commission at no extra cost to you.. Read more.

Purchasing products such as laptops from different dealers or retailers can be a daunting task. This is even worse if you don&#;t understand much about Predator Cc Torque Converter. One of the most important things to consider when it comes to buying a Predator Cc Torque Converter is the specs of features.

Why You should Buy the Best Predator Cc Torque Converter on Amazon

There is a reason why many people prefer buying products from Amazon. Despite being a credible platform, Amazon has a variety of laptops and also works directly with manufacturers. This means that instead of purchasing your laptop from a retailer, you get it directly from the manufacturing company.

Amazon serves as a third-party and works with various manufacturers across the world. The good thing about Amazon is that it offers a perfect guide about each type of laptop.You will see a clear description of each Predator Cc Torque Converter. This makes it easy for you to make the right decision.

For instance, the guide has information regarding the specs of the Predator Cc Torque Converter you want such as brand, size, function among other features. In case you want a Predator Cc Torque Converter with specific features, then Amazon has the best search tools. All you have to do is to key in the features you prefer and a list of laptops will appear on your screen.

Other Benefits of Buying Products from Amazon

There are numerous benefits of purchasing Predator Cc Torque Converter and other products from Amazon. Here are some of the common benefits:

Best Prices

There&#;s no doubt that Amazon offers the best prices for most products. This is because the platform works in conjunction with a host of manufacturing companies and dealers. As a result, a lot of intermediaries are cut off hence reducing the cost of various products.

Reliability

Amazon is an international company that has offices and stores across the world. Their ability to deliver is much higher compared to other online platforms. Besides, they have great customer service that works round the clock to ensure customer satisfaction.

Huge Selection

Amazon has a large number of sellers from all over the world. This means that you can access a huge variety of products and services every day. It also means that you have different options to choose from.

For example, if you want to purchase a treadmill, you are able to compare the prices and specs from different sellers and make the right decision.

Trustworthy

The other advantage of purchasing products from Amazon is credibility. The company has been in operation for many years and there are lots of positive reviews from customers across the world.

How to Choose the Best Predator Cc Torque Converter

As mentioned earlier, Amazon is one of the best platforms to purchase products like Predator Cc Torque Converter. However, it can sometimes be a challenge to get the exact Predator Cc Torque Converter you want, especially if you are using the platform for the first time.

Here are some of the things to consider when choosing the best Predator Cc Torque Converter on Amazon:

Price

Price is one of the most important factors to consider when buying Predator Cc Torque Converter from Amazon. There&#;s no one who doesn&#;t want to get quality products and reasonable prices. With Amazon, you are able to compare laptop prices from different sellers and settle on the most favorable one.

Brand

The other important factor you need to consider when buying a Predator Cc Torque Converter from Amazon is the brand. Different sellers sell different types of brands and it is important to understand each type of the brands in order to make the right decision. High-quality and popular brands like Apple brand usually cost more compared to less popular ones.

Function

You also need to consider the functionality of a Predator Cc Torque Converter before purchasing it. The functionality of any Predator Cc Torque Converter usually depends on the specs it contains. The more sophisticated the specs are, the higher the functionality.

Old Customer Reviews

Most customers leave feedback with regard to their experience with the different Predator Cc Torque Converter they bought from Amazon. The reviews are always displayed on the same page where the product is located. Looking at such reviews will help you to know whether the Predator Cc Torque Converter you want to buy good or bad.

Categories Clothing & ShoesSours: https://www.botticellissouthcongress.com/best-predatorcc-torque-converter/
Predator 420 13 Hp 40 Series Torque Converter On A Chinese Go Cart

In this review, we’ll be taking a look at the best torque converters for your go-kart. We’ll be evaluating each torque converter based on affordability, build quality, components, belt size, chain size, dimensions, and specifications. 

After the review section, you can find a buying guide in which we will be discussing several aspects on what to look out for when buying a go-kart torque converter. The buying guide aims to help you with your purchase decision.

Torque converters are variable transmissions for go-karts that are attached to the side of the engine. They provide a variable gear ratio and are therefore ideal for lower-speeds, heavy stop-and-go situations or climbing uneven terrain. With this in mind, let’s take a look at the best torque converters for go-karts.

Disclaimer
I may collect a small commission from product sales on this page, at absolutely no cost to you. All proceeds go to maintaining GoKartGuide.com, which I currently run on my own. Thanks for reading and race safely!

1. Moosun Torque Converter (30 Series)


Features

  • Compatible with 30 Series belt
  • Recommended for 2 hp to 7 hp engine
  • Engagement range at 2, &#; 2, rpm

The Moonsun Torque Converter is the best go-kart torque converter in this list as it strikes the perfect balance between affordability and quality. It’s a direct aftermarket replacement for the Comet TAV2 torque converter and is compatible with 30 series belts that have an asymmetrical design.

This torque converter is compatible with any straight crankshaft that has a 3/4” diameter and is a great fit for homemade, custom, Yerf Dog and Manco go-karts. It also comes with two sprockets. The tooth sprocket fits #40/41/ chain and the tooth sprocket fits any #35 chain.

It provides smooth acceleration and reduces the engine load. The center-to-center distance is /16 to 7&#; and is suitable for belts with a 3/4&#; top width and an outer circumference of 27 23/64&#;. The Moonsun Torque Converter also comes with the required mounting hardware and instructions for easy installation. It’s the perfect torque converter if you’re planning on building your own go-kart or replacing an existing unit.

Specifications

Driven Pulley Diameter: 6&#;
Driver Pulley Clutch Bore: 3/4&#;
Belt Top Width: 3/4&#;
Sprocket Chain (10 Tooth): #40/41 chain
Sprocket Chain (12 Tooth): #35 chain
Engagement Range: 2, &#; 2, rpm
Recommended Engine: 2 hp &#; 7 hp

Kit

1 x Drive Belt
1 x Plastic Cover
1 x 3/4&#; Driver Pulley
1 x 5/8&#; Driven Pulley (6&#; Diameter)
1 x Aluminum Mounting Plate
1 x 10 Tooth Sprocket for #40 #41 Chain
1 x 12 Tooth Sprocket for #35 Chain
1 x Mounting Hardware Kit

2. AcPulse Torque Converter (30 Series)


Features

  • Compatible with 30 Series belt
  • Recommended for 2 hp to 7 hp engine
  • Engagement range at 2, &#; 2, rpm

The AcPulse Torque Converter is another great option for go-karts, as it’s high-quality and reasonably priced. It’s made of a durable iron and aluminium material, which is very wear-resistant. Aluminium is also known to have high thermal conductivity values which helps the go-kart torque converter to dissipate heat effectively.

Overall, it’s a great Comet TAV2 aftermarket replacement that has similar qualities and specifications as the Moonsun Torque Converter. The AcPulse Torque Converter is compatible with 3/4&#; crankshafts and a great fit for Predator cc engines.

This kit contains two sprockets that are compatible with a #35 chain and a #40/41 chain. The pulley belt is an asymmetrical type with a top width of 3/4&#;. Unfortunately, this torque converter doesn’t come with assembly instructions. However, you can refer to the FAQ for further information. All things considered, the AcPulse Torque Converter is a suitable transmission for homemade and off-road go-karts.

Specifications

Driven Pulley Diameter: 6&#;
Driver Pulley Clutch Bore: 3/4&#;
Belt Top Width: 3/4&#;
Sprocket Chain (10 Tooth): #40/41 chain
Sprocket Chain (12 Tooth): #35 chain
Engagement Range: 2, rpm &#; 2, rpm
Recommended Engine: 2 hp &#; 7 hp

Kit

1 x Plastic Cover
1 x Aluminum Mounting Bracket Plate
1 x 10 Tooth Sprocket for #40/41 chain
1 x 12 Tooth Sprocket for #35
1 x 5/8&#; bore driven pulley 6&#; diameter
1 x 3/4&#; Driver pulley
1 x Full Mounting hardware Kit
1 x Drive belt

3. GoPowerSports Torque Converter (30 Series)


Features

  • Compatible with 30 Series belt
  • Recommended for 2 hp to 8 hp engine
  • Engagement range at 2, &#; 2, rpm

The GoPowerSports Torque Converter is a great fit for go-karts with a Predator, Harbor Freight, Tecumseh, Briggs & Stratton or Honda engine. GoPowerSports is a large wholesaler and retail distributor of high-quality go-kart parts. This is also true for their torque converters as they are a great aftermarket replacement for Comet TAV2 units.

It features a heavy-duty aluminium backplate for effective heat dissipation and a plastic belt guard that encases the pulleys and drive belt. The belt guard is a nice addition, as it protects the torque converter belt from external damage. The driver pulley bore is 3/4&#;, whereas the driven pulley has a bore of 5/8&#;.

The GoPowerSports Torque Converter is compatible with Comet 30 Series asymmetrical belts, or any equivalent that match the 30 Series belt specifications. It also comes with two sprockets (tooth and tooth) which are compatible with a #35 chain and #40/4, respectively.

Specifications

Driven Pulley Diameter: 6&#;
Driver Pulley Clutch Bore: 3/4&#;
Belt Top Width: 3/4&#;
Sprocket Chain (10 Tooth): #40/41 chain
Sprocket Chain (12 Tooth): #35 chain
Engagement Range: 2, rpm &#; 2, rpm
Recommended Engine: 2 hp &#; 8 hp

Kit

1 x Belt Guard
1 x Aluminum Mounting Bracket Plate
1 x 10 Tooth Sprocket for #40/41 chain
1 x 12 Tooth Sprocket for #35
1 x 5/8&#; bore driven pulley 6&#; diameter
1 x 3/4&#; Driver pulley
1 x Full Mounting hardware
1 x Drive belt

4. Bullet Lines Torque Converter (30 Series)


Features

  • Compatible with 30 Series belt
  • Recommended for 5 hp to 9 hp engine
  • Engagement range at 2, rpm

The Bullet Lines Torque Converter is another great option for smaller sized go-kart engines such as the Predator cc. It requires no external modifications and can be installed fairly quickly. It’s a torque converter that is similar to the Comet TAV2 and is compatible with almost all go-kart engines.

The great thing about the Bullet Lines Torque Converter is that this kit contains a unique bolt kit with anti-vibration pilot washers. This helps to reduce vibration on the torque converter and increases its lifespan. There’s also an extra piece of hardware included that makes it uniquely compatible and suitable for Predator cc engines.

Although it has a rated engagement range of 2, rpm, it can be adjusted from a minimum of 1, rpm to a maximum of 3, rpm. However, this may require additional springs. Overall, this torque converter is one of the best choices for Predator cc engines.

Specifications

Driven Pulley Diameter: 6&#;
Driver Pulley Clutch Bore: 3/4&#;
Belt Top Width: 3/4&#;
Sprocket Chain (10 Tooth): #40/41 chain
Sprocket Chain (12 Tooth): #35 chain
Engagement Range: 2, rpm
Recommended Engine: 5 hp &#; 9 hp

Kit

1 x Belt Guard
1 x Aluminum Mounting Bracket Plate
1 x 10 Tooth Sprocket for #40/41 chain
1 x 12 Tooth Sprocket for #35
1 x 5/8&#; bore driven pulley 6&#; diameter
1 x 3/4&#; Driver pulley
1 x Full Mounting hardware
1 x Drive belt

5. Jeremywell Torque Converter (40 Series)


Features

  • Compatible with 40 Series belt
  • Recommended for 8 hp to 18 hp engine
  • Engagement range at 1, &#; 3, rpm

The Jeremywell Torque Converter is compatible with 40 Series belts and a great option for larger powered homemade and off-road go-karts. This torque converter kit is relatively lean, as it only features a driver pulley, a driven pulley and a compatible torque converter 40 Series belt.

This is a much larger torque converter than the typical TAV2 aftermarket units and therefore only suitable if you’re using a larger go-kart engine. The driven pulley is ” and therefore requires a 40 Series belt, which is included in the kit.

Unfortunately, there is no mounting bracket, hardware or belt cover included. You could purchase these parts separately or opt for a different version. The Jeremywell Torque Converter has an engagement range of 1, 3, rpm.

Specifications

Driven Pulley Diameter: &#;
Driver Pulley Clutch Bore: 1&#;
Belt Top Width: 7/8&#;
Engagement Range: 1, &#; 3, rpm
Recommended Engine: 8 hp &#; 18 hp

Kit

1 x Driven pulley
1 x Driver pulley
1 x Drive belt

Buying Guide

In this section, I’ll be pointing out some of the aspects that you should consider before deciding which torque converter is best for your go-kart. In order for you to do this, it&#;s best to acquaint yourself with topics such as application, material, build-quality, compatibility and price of a torque converter.

Application

The first thing you should consider when purchasing a torque converter is it&#;s application. In other words, you should determine what type of go-kart you have or are intending to build.

A torque converter is a variable transmission for go-karts that has the ability to go into overdrive. It usually starts out with a great ratio of : 1 and can go as low as : 1. This makes it extremely versatile for lower torque ranges, climbing uneven terrain and stop-and-go-traffic.

Homemade Go-Karts

Torque converters are great for custom and homemade go-karts. If you’re building your own go-kart, it&#;s usually advisable to go for a smaller to mid-sized torque converter. Any aftermarket TAV2 (30 Series belts) would be a good choice, as they’re compatible with almost any type of go-kart engine.

Off-Road Go-Karts

If you own an off-road go-kart, you’ll notice that torque converters are very common. This is because they handle heavy loads and low-speeds better than other transmissions. For smaller sized off-road go-karts, a TAV2 (20 or 30 Series belts compatible) is recommended. They’re compact and should suffice. If you own a larger off-road go-kart it’s highly recommended to use a larger torque converter, that supports a 40 Series belt.

Racing Go-Karts

Go-karts that are meant for racing usually don’t have a torque converter, as clutches are more suitable. However, under certain circumstances you could opt for a torque converter instead. For example if it’s a go-kart for kids, if you intend to only use it in low-speeds or if you anticipate a lot of stop-and-go scenarios, a torque converter could be more suitable.

Material

Torque converters are designed to take heavy loads. This means that the pulley and belt system will create a lot of heat, as the crankshaft spins. Therefore, it’s important that a torque converter is made with high-quality and durable parts.

You’ll notice that all of the torque converters in this list (besides the Jeremywell Torque Converter) have an aluminium backplate. Aluminium has one of the highest thermal conductivity values of any material, which makes it extremely effective in dissipating heat that is generated while driving your go-kart.

You should always ensure that you get a torque converter with an aluminium backplate, as it functions as a heat sink. An overheating torque converter will lead to increased part and belt wear.

Contents

Most of the torque converters come in a kit that you can easily assemble on to the engine of your go-kart. It’s important that you ensure that it contains all the parts that are needed. You should make sure that it has at least two pulleys, a belt and the required hardware for mounting.

However, it&#;s best if the torque converter kit contains all the added parts such as an aluminum backplate, belt guard and two sprockets. Here’s a list of components that you should expect from the best go-kart torque converter kits:

  • Drive Belt
  • Driver Pulley
  • Driven Pulley
  • Belt Guard
  • Aluminum Backplate
  • Sprockets (usually tooth & tooth)
  • Mounting hardware

Compatibility

Another important thing to do is to ensure that the torque converter is compatible with your belt. The best go-kart torque converters in this list come with a compatible belt (30 or 40 Series).

If you have an existing belt that you want to use, you’ll need to check that the measurements of the belt are compatible with the torque converter. To check belt and torque converter compatibility, you can use the belt size chart. In this chart, you&#;ll be able to see all compatible belt sizes for your torque converter.

Price

The torque converters in this list are all reasonably priced with an excellent cost-to-performance ratio. A high-quality aftermarket torque converter will cost about $90 to $ They are more than sufficient for off-road and homemade go-karts and are as good as branded ones.

The normal price for a branded torque converter would cost you about 2 to 3 times more for the same quality. It’s always best to decide on your budget first and then select a torque converter that fits comfortably in that range.

Frequently Asked Questions

I’ve compiled a list of the most frequently asked questions that I have received through comments, messages and emails. If you would like to have a question added, please get in touch with me.

When to Choose a Go-Kart Torque Converter Over a Clutch?

To give you the short answer, go-kart torque converters are most suitable for off-road, custom, kid and homemade go-karts. It’s also suitable for go-karts that are often in a low-speed or stop-and-go situation.

The reason for this is rather simple. Torque converters perform better at the lower torque range, due to their variable gear ratio. It can easily adapt according to the engine’s rpm and has the ability to dynamically change the gear ratio.

The same thing cannot be said about a go-kart clutch. Clutches perform better at higher torque ranges and are therefore more common in racing go-karts. They feel “snappier” and offer a better top speed. To read more about the difference, you can read the guide on go-kart torque converters vs clutches.

What Engines Are Torque Converters Compatible With?

Torque Converters are compatible with most vertical 2-stroke go-kart engines. It depends on the engine design, but most of them are compatible with go-kart engines from brands such as:

  • Tecumseh
  • Honda
  • Briggs & Stratton
  • Predator
  • Harbour Freight
  • Titan
  • And many more&#;

What Kind of Gear Ratio Can I Expect From a Torque Converter

For a standard TAV2 equivalent torque converter that is compatible with a 30 Series belt, the gear ratio usually starts around : 1. At higher rpm ranges of the engine, the torque converter can go into overdrive and dynamically adjust the gear ratio to about : 1.

How Do I Install a Torque Converter?

Unfortunately, most of the torque converter kits do not come with an installation manual. However, the good news is that installing a torque converter is really easy and very straightforward. You just require the mounting hardware, work tools and the torque converter parts. No welding is required, only assembling the parts. 

If you require a guide on how to install a torque converter on a go-kart you can refer to this video. It shows you all the individual steps of the installation process.

Sours: https://www.gokartguide.com/best-torque-converters/

Converter torque predator 420

BLAST LED - Predator CC Go Kart Torque Converter Kit: 40 Series Mounting Back Plate, 1" Driver, Driven Pulley, Belt, Mounting Hardware (5/8" Driven Pulley)

40 Series Go Kart Torque Converter Kit w/ MOUNTING BACKPLATE

40 series go kart torque converter kit includes set of brand new high quality 40 Series 1&#; driver pulley, and driven clutch (5/8&#; OR 3/4&#; OR 7/8&#;-- choose your size per your installation), mounting back-plate with jack-shaft and belt. Plate is cut from 1/4&#; thick solid steel. Great for use on high performance engines with a 1&#; crankshaft diameter-- Ideal for Predator CC, GX /, Briggs and Stratton, Vanguard V-Twins, Duromax, Powerhouse cc and Ironton cc.

  • Replacement for COMET 40 Series and many other engines:
    • COMET-- , A, , A, , A
    • FITS all 8HPHP engines with a 1&#; crankshaft with 1/4&#; keyway.
    • Works well for high performance Go Karts, ATVs and small off-road vehicles involving rough terrain, slopes, small hills, gravel.

PACKAGE INCLUDES:

  • 1&#; Shaft size Driver Clutch with 1/4&#; keyway
  • Driven Clutch (5/8&#; or 3/4&#; or 7/8&#;)-- Select size required during checkout
  • 1 Belt: Symmetrical
  • Bolt-on Mounting backplate with integrated jackshaft
  • Both 10T & 12T Sprocket provided in the kit
  • Customized bolt holder
  • Mounting Hardware
Sours: https://www.amazon.com/Kart-Torque-Converter-Kit/dp/BRBXWV9
SUPER POWER! Predator 420cc \u0026 Honda Engine Torque Converter Quick Install -Part 5

Predator cc GO KART MINI BIKE TORQUE CONVERTER CLUTCH #40/41 10T or #35 12T

BLAST LED 1" Go Kart Torque Converter Clutch fits a 1" shaft and comes with a 10T #40/41 or 12T #35 sprocket for a 40/41 chain. It will work with small engines producing 8 HP - 16 HP.

BLAST LED torque converter fits Predator cc 13HP engine. The kit includes "4 mounting bolts required to mount the torque converter on the predator engine. These bolts do not come with predator engine, so we have included in our kit.

Heavy Duty 40 Series Go Kart Torque Converter Kit w/ MOUNTING BACKPLATE

This kit includes set of brand new high quality 40 Series 1" driver pulley, and driven clutch (5/8" OR 3/4" OR 7/8"-- choose your size per your installation), mounting backplate with jackshaft and belt. Plate is cut from 1/4" thick solid steel. Great for use on high performance engines with a 1" crankshaft diameter-- Ideal for Predator CC, Honda GX /, Briggs and Straton, Vanguard V-Twins, Duromax, Powerhouse cc and Ironton cc.

  • Replacement for COMET 40 Series and many other engines:
    • COMET-- , A, , A, , A
    • FITS all 8HPHP engines with a 1" crankshaft with 1/4" keyway.
    • Works well for high performance Go Karts, ATVs and small off-road vehicles involving rough terrain, slopes, small hills, gravel.

PACKAGE INCLUDES:

  • 1" Shaft size Driver Clutch with 1/4" keyway
  • Driven Clutch (5/8" or 3/4" or 7/8")-- Select size required during checkout
  • 1 Belt: Symmetrical
  • Bolt-on Mounting backplate with integrated jackshaft
  • Both 10T & 12T Sprocket provided in the kit
  • Customized bolt holder
  • Mounting Hardware

Video Courtesy of "@myskiis2fast4u" - BLAST LED Customer

Each installation is different and may require modification to mount it. 

 

Sours: https://blastled.com/

Similar news:

I feel that I am wrong. And pricks of conscience. They don't.



907 908 909 910 911